- 非IC关键词
西安尚平电子科技有限公司
- 营业执照：未审核经营模式：其他所在地区：陕西 西安
收藏本公司 人气：36733
企业档案
- 相关证件：
- 会员类型：普通会员
- 马女士
- 电话：029-81777783
- 手机：18092826768
- 地址：长安南路449号
- 传真：029-87878338
- E-mail：xacomponents@163.com
您的当前位置：西安尚平电子科技有限公司 > 元器件产品
相关产品
产品信息
MP2060 Kool-Pak® Clip Mount Power Film Resistor
CASE TEMPERATURE, °C
0
20
40
100
80
60
RATED POWER %
All power and associated overload ratings are
derated based upon case temperature using the
derating curve. The case temperature is measured at the center of the ceramic mounting surface, with the part properly mounted and under
electrical load. Without a heat sink, when in free
air at +25°C, the MP2060 is rated for 2.5 watts.
The thermal design should satisfy the following equation:
Case Temperature (Tc) + [Thermal Resistance (RθJC) x power applied (Watts)] ≤ 150°C, considering the full
operating temperature range of the application.
Mounting Note: Mount on a smooth, clean and flat heat sink surface with a thermal interface material, such as
thermal grease. The entire exposed ceramic portion must be in contact with the heat sink. When using a
spring clip, it is recommended that a mounting force of 8 to 30 pounds (35 to 130 N) be applied to the center of
the package. The clip should be round or smooth in the contact area to avoid concentrating the load on a small
point of the plastic body of the package. Another mounting option is to use a pressure bar method which can
achieve a greater mounting force with a greater contact area.
For additional applications information regarding mounting and pulse handling see the Caddock Applications Notes at caddock.com or contact Applications Engineering.
*
Derating Using Case Temperature (TC):
Derating Curve
0.005 Ω 5%
0.010 Ω 2%
0.015 Ω 2%
0.020 Ω
0.025 Ω
0.030 Ω
0.033 Ω
0.040 Ω
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
500 Ω
560 Ω
750 Ω
1.00 K
Standard Resistance Values:
Tolerance: 1% Standard (except as noted)
For custom values and tolerances contact
Applications Engineering
Ordering Information:
DIMENSIONS IN INCHES AND (MILLIMETERS)
Specifications:
Temperature Coefficient:
TC referenced to +25°C, ΔR taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +100 ppm/°C
0.015 ohm to 0.049 ohm, 0 to +200 ppm/°C
0.005 ohm to 0.014 ohm, 0 to +300 ppm/°C
Operating Temperature: -55°C to +150°C
Inductance: 10 nH typical in series when
measured at the shoulder of the lead.
Capacitance: <1 pf typical without heat sink.
DWV: 1500 VrmsAC isolation to the mounting
surface or a clip in contact with the top surface.
Insulation Resistance: 10,000 Megohms, min.
The resistor element is electrically isolated from the
mounting surface.
Momentary Overload: 1.5 times rated power for
5 seconds, ΔR ±(0.5 percent + 0.0005 ohm) max.
Load Stability: 2000 hours at rated power
ΔR less than ±(1 percent +0.0005 ohm).
Moisture Resistance: Mil-Std-202, Method 106,
ΔR ±(0.5 percent + 0.0005 ohm) max.
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ΔR ±(0.5 percent + 0.0005 ohm) max.
Shock: 100G, Mil-Std-202, Method 213,
Cond. I, ΔR ±(0.4 percent + 0.0005 ohm) max.
Vibration, High Frequency: Mil-Std 202,
Method 204, Condition D, ΔR ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength: Mil-Std-202, Method 211,
Cond. A (Pull Test) 5 lbs., ΔR ±(0.2 percent
+ 0.0005 ohm) max.
Terminal Material: Solderable
Measurement Note: Resistance measurements
shall be made at 0.2 inch (5.08 mm) from the
resistor body.
These products are covered by one or more
patents, also patents pending.
• Up to 60 Watts continuous power at +25°C case temperature, 0.020Ω and above.
• Up to 60 Amps continuous current at +25°C case temperature, 0.015Ω and below.
• TO-220 Style package utilizes proven power semiconductor thermal solutions.
• Equivalent to UL94 V-0 flammability rating.
• Excellent pulse/surge performance.
• Non-inductive design for high speed switching, snubbers and rf applications.
• Operation up to +150°C case temperature.
• Electrically isolated case.
TO-220 Style Power Resistor Designed for Clip Mounting - Non-Inductive
Packaging Information: MP2060 resistors are packaged in plastic shipping tubes, 50 pieces
per tube. These resistors are available in a 50 p
CASE TEMPERATURE, °C
0
20
40
100
80
60
RATED POWER %
All power and associated overload ratings are
derated based upon case temperature using the
derating curve. The case temperature is measured at the center of the ceramic mounting surface, with the part properly mounted and under
electrical load. Without a heat sink, when in free
air at +25°C, the MP2060 is rated for 2.5 watts.
The thermal design should satisfy the following equation:
Case Temperature (Tc) + [Thermal Resistance (RθJC) x power applied (Watts)] ≤ 150°C, considering the full
operating temperature range of the application.
Mounting Note: Mount on a smooth, clean and flat heat sink surface with a thermal interface material, such as
thermal grease. The entire exposed ceramic portion must be in contact with the heat sink. When using a
spring clip, it is recommended that a mounting force of 8 to 30 pounds (35 to 130 N) be applied to the center of
the package. The clip should be round or smooth in the contact area to avoid concentrating the load on a small
point of the plastic body of the package. Another mounting option is to use a pressure bar method which can
achieve a greater mounting force with a greater contact area.
For additional applications information regarding mounting and pulse handling see the Caddock Applications Notes at caddock.com or contact Applications Engineering.
*
Derating Using Case Temperature (TC):
Derating Curve
0.005 Ω 5%
0.010 Ω 2%
0.015 Ω 2%
0.020 Ω
0.025 Ω
0.030 Ω
0.033 Ω
0.040 Ω
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
500 Ω
560 Ω
750 Ω
1.00 K
Standard Resistance Values:
Tolerance: 1% Standard (except as noted)
For custom values and tolerances contact
Applications Engineering
Ordering Information:
DIMENSIONS IN INCHES AND (MILLIMETERS)
Specifications:
Temperature Coefficient:
TC referenced to +25°C, ΔR taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +100 ppm/°C
0.015 ohm to 0.049 ohm, 0 to +200 ppm/°C
0.005 ohm to 0.014 ohm, 0 to +300 ppm/°C
Operating Temperature: -55°C to +150°C
Inductance: 10 nH typical in series when
measured at the shoulder of the lead.
Capacitance: <1 pf typical without heat sink.
DWV: 1500 VrmsAC isolation to the mounting
surface or a clip in contact with the top surface.
Insulation Resistance: 10,000 Megohms, min.
The resistor element is electrically isolated from the
mounting surface.
Momentary Overload: 1.5 times rated power for
5 seconds, ΔR ±(0.5 percent + 0.0005 ohm) max.
Load Stability: 2000 hours at rated power
ΔR less than ±(1 percent +0.0005 ohm).
Moisture Resistance: Mil-Std-202, Method 106,
ΔR ±(0.5 percent + 0.0005 ohm) max.
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ΔR ±(0.5 percent + 0.0005 ohm) max.
Shock: 100G, Mil-Std-202, Method 213,
Cond. I, ΔR ±(0.4 percent + 0.0005 ohm) max.
Vibration, High Frequency: Mil-Std 202,
Method 204, Condition D, ΔR ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength: Mil-Std-202, Method 211,
Cond. A (Pull Test) 5 lbs., ΔR ±(0.2 percent
+ 0.0005 ohm) max.
Terminal Material: Solderable
Measurement Note: Resistance measurements
shall be made at 0.2 inch (5.08 mm) from the
resistor body.
These products are covered by one or more
patents, also patents pending.
• Up to 60 Watts continuous power at +25°C case temperature, 0.020Ω and above.
• Up to 60 Amps continuous current at +25°C case temperature, 0.015Ω and below.
• TO-220 Style package utilizes proven power semiconductor thermal solutions.
• Equivalent to UL94 V-0 flammability rating.
• Excellent pulse/surge performance.
• Non-inductive design for high speed switching, snubbers and rf applications.
• Operation up to +150°C case temperature.
• Electrically isolated case.
TO-220 Style Power Resistor Designed for Clip Mounting - Non-Inductive
Packaging Information: MP2060 resistors are packaged in plastic shipping tubes, 50 pieces
per tube. These resistors are available in a 50 p